Welcome

Thanks for choosing the XCAM Ultra

This guide takes you from unboxing to watching live on your phone, then covers motion alerts, recording, sharing and the settings you are most likely to need.

Before you start, you'll need

• A smartphone (iPhone or Android).
• A 2.4GHz WiFi network and its password. 5GHz, hidden and enterprise (work login) networks are not supported.
• Optional: a microSD card up to 256GB so the camera can record by itself. Cards are sold separately.
• An email address to create a free O-KAM Pro account.

Section 1

What's in the box & your camera

In the box

Your camera

On its stand

Back panel

• 1Lens: 1296P, 135° wide angle
• 2PIR sensor (the round window below the lens) detects body heat
• 3940nm infrared LEDs: no visible glow at night
• 4Power switch on the back panel
• 5USB-C charging port
• 6microSD card slot (up to 256GB)
• 7Reset button (R)
• 8Indicator lights (blue, red, yellow)
• 9Microphone

Section 2

Switch, lights & charging

Switch and reset

What the lights mean

Charging

• Use the USB-C cable supplied and a standard 5V / 1A USB charger. Do not use a charger that outputs more than 5V.
• The 1400mAh battery gives about 8 hours of continuous recording. A full charge takes 3 to 4 hours.
• The camera keeps working while it charges, so you can leave it on USB power permanently.
• It is normal for the camera to feel warm while it is running.

Section 3

Install the app & create an account

Install O-KAM Pro

• Search for O-KAM Pro in the App Store (iPhone) or Google Play (Android), or scan the QR code on the leaflet in the box.

Create your account

Get ready to connect

• Switch the camera on and reset it to factory settings (Switch, lights & charging).
• Put the camera within 2 metres of your WiFi router for setup.
• Connect your phone to your 2.4GHz WiFi and have the password ready.

There are two ways to connect the camera: Bluetooth (Connect with Bluetooth (recommended)), the quickest, and hotspot (Connect with the camera's hotspot).

Section 4

Connect with Bluetooth (recommended)

Section 5

Connect with the camera's hotspot

Section 6

Connect to or change WiFi

Use this to move a hotspot-connected camera onto your home WiFi, or after you change your router or WiFi password.

Other device settings

Section 7

Motion alerts

The Ultra has a PIR sensor that detects the body heat of a person moving in front of it. It reacts to people far more than to shadows, curtains or passing headlights, so you get fewer false alerts.

• A large pet close to the camera can still set it off.
• The PIR sensor works best when people cross the camera's view rather than walk straight towards it.
• Between events the camera can rest in a low-power standby (about 5mA) and wake when needed. Choose how it balances battery and responsiveness in Power mode.

Turn alerts on or off

• During setup, the camera's settings page offers Notification push and Motion Detection switches.
• Later, open the camera's ⚙ Settings and use Notification Settings and Monitoring Function.
• Allow notifications for O-KAM Pro in your phone's settings, or the alerts won't appear.
• Tap the bell (Silence) on the camera's card to pause alerts for a while.

See what happened

Tap an alert to open the camera. Past recordings are under Playback on the camera's card and in Messages.

Section 8

Recording, storage & night vision

microSD card

• Supports cards up to 256GB. Cards are sold separately.
• Insert the card into the camera's card slot with the camera switched off.
• Choose how the camera records to the card in ⚙ Settings → TF Record Settings.
• Watch recordings with Playback on the camera's card.
• If the camera doesn't recognise the card, format it from TF Record Settings or try a different card.

Cloud storage (optional)

O-KAM Pro offers paid cloud storage, and the app may show a free trial and upgrade prompts. You don't need it: the camera records to the microSD card with no subscription.

Night vision

Night vision switches on automatically when the room goes dark. The Ultra uses 940nm infrared, which gives off no visible red glow, and lights the scene to about 3 metres.

Section 9

Mounting, sharing & listening

Mounting

Stand the camera on its desk stand and tilt it to the angle you need. Place it on a stable, level surface out of reach of children and pets.

Share with family

1. On the home screen, tap ⋮ on the camera's card, then Share. A QR code appears.
2. Choose whether to Offer setting permissions.
3. The other person installs O-KAM Pro, logs in and scans the code. Each code is valid for 30 minutes and can be used by one person.

Up to 4 people can watch the camera at the same time.

Listening

The camera has a built-in microphone, so you can hear the room in the live view. It has no speaker, so you can't talk through it.

Section 10

Troubleshooting

Section 11

Specifications, care & safety

Care & safety

• Charge only with a 5V USB charger. Don't use damaged cables, and don't use a charger that outputs more than 5V.
• For indoor use. Keep the camera away from water, rain, high humidity and direct heat.
• Don't open the camera or try to replace the built-in battery.
• Keep small parts away from young children.
• Recycle the camera and its battery responsibly. Don't put them in household waste.

Using a camera responsibly

Monitoring your own home, property or business is legal in most countries. Recording people where they reasonably expect privacy is not, and audio recording carries extra restrictions in many places. Check the rules where you live before you place the camera, and tell guests, tenants or staff where cameras are in use.